Treatment of glass ceramic surface (inside of window):

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2006 BMW 330Ci, 2005 BMW 330xi, 2005 BMW 330i, 2005 BMW 330Ci, and 2004 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.

GLASS CERAMIC SURFACE (INSIDE OF WINDOW) TREATMENT

Adhesive (with part numbers)	Treatment
Hot cementing: BMW 83 190 147 370, MINI 83 190 147 372 Cold cementing: BMW 83 190 147 369, MINI 83 190 147 371 Adhesive cartridge: BMW 83 190 152 031, MINI 83 190 152 032	Clean with spirit (available in pharmacies). Observe an air drying time of at least 1 minute Apply a thin coating of "Glass Activator 1" Observe an air drying time of at least 10 minutes

Adhesive (with part numbers)

Treatment

Hot cementing:

BMW 83 190 147 370, MINI 83 190 147 372

Cold cementing:

BMW 83 190 147 369, MINI 83 190 147 371

Adhesive cartridge:

BMW 83 190 152 031, MINI 83 190 152 032

Clean with spirit (available in pharmacies).
Observe an air drying time of at least 1 minute
Apply a thin coating of "Glass Activator 1"
Observe an air drying time of at least 10 minutes

Version with inspection window for vehicle identification number in windscreen only (all except US/GB):

Seal inspection window (bottom left) with Sika primer 206 G+P