LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Body Equipment - Repair) >> BMW Emblems, Models Emblems >> 51 14 110 Removing and installing/replacing rear model designation >> Fitting dimensions for Coupe and Convertible:

Fitting dimensions for Coupe and Convertible:

WARNING: This page does not describe the selected car, but rather 16 other vehicles, including the 2006 BMW 330Ci, 2005 BMW 330xi, 2005 BMW 330i, 2005 BMW 330Ci, and 2004 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Fitting Dimensions For Coupe & Convertible
G03124205Courtesy of BMW OF NORTH AMERICA, INC.

Stick on adhesive tape up to top edge "A" and mark out measurement "B".

ADHESIVE TAPE DIMENSIONS

Coupe (all except M3) A = 55 mm B = 15.5 mm
M3 Coupe A = 42.5 mm B = 41 mm
Convertible (except M3, 320 Cd) A = 42.5 mm B = 21 mm
M3 Convertible A = 16.4mm B = 10.8 mm
320 Cd Convertible A = 56.5 mm B = 19 mm