16 13 015 Removing and installing/replacing diagnosis module-tank leakage (DM-TL)

DM-TL = diagnosis module-tank leakage 

Release screws (1), lift out expansion rivet (2) and remove cover (3).

Lever out expansion rivets (4) and remove cover (5).

Fig 1: Lifting Out Expansion Rivet

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten plug connection (1).

Release screws (2) and lower carbon canister (3) with DM-TL (4).

Fig 2: Unfastening Plug Connection

Courtesy of BMW OF NORTH AMERICA, INC.

Installation: 

Press rubber-encased lugs (1) on carbon canister (2) into mountings (3).

Fig 3: Pressing Rubber-Encased Lugs On Carbon Canister Into Mountings

Courtesy of BMW OF NORTH AMERICA, INC.

Unfasten line (1) and detach.

Unfasten screws (2).

Detach DM-TL (3) towards rear from carbon canister (4).

Fig 4: Unfastening Line And Detach

Courtesy of BMW OF NORTH AMERICA, INC.