00 8 000 Hydraulic puller tool
WARNING: This page is about a different car, the 2005 BMW 760i, 2005 BMW 760Li, 2004 BMW 760Li, and 2003 BMW 760Li. However, it is still accessible from the selected car via links, so may be relevant.
HYDRAULIC PULLER TOOL SPECIFICATIONS
| In conjunction with: | With all previous removal/installation tools for rubber mounts |
| Note: | For removing and installing rubber mount in rear axle carrier |
| Series: | E12, E21, E23, E24, E28, E30, E30/C, E30tou, E31, E32, E32/3, E34, E34tou, E36, E36/2, E36/3, E36/5, E36/7, E36/C, E36tou, E38, E38/3, E39, E39PL, E39tou, E46, E46/16, E46/2, E46/3, E46/5, E46/C, E52, E53, E60, E61, E63, E64, E65, E66, E67, E83, E85, E87, R50, R52, R53, RR1 |
| Storage location: | Single |
| SI number: | 1 02 99(417) |
| Order number: | 00 8 000 |
| Hydraulic puller tool | |
| Consisting of: | |
| 1 = 00 8 001 | Hydraulic pump |
| 2 = 00 8 002 | Hydraulic hose |
| 3 = 00 8 003 | Hydraulic cylinder |
| 00 8 004 | Threaded spindle |
|
NOTE:
M14 x 520
|
|
| 00 8 005 | Threaded spindle |
|
NOTE:
M12 x 496
|
|
| 00 8 006 | Threaded spindle (optional) |
|
NOTE:
M14 x 465
|
|
| 00 8 007 | Nut M18 |
| 00 8 008 | Securing line |
| 00 8 009 | Spindle with nut |