LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Body Equipment - Tightening Torques) >> Front Bumper >> 51 11 Front Bumper

51 11 Front Bumper

WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.
FRONT BUMPER SPECIFICATION

  Type Thread Tightening Specification Measure
1AZ Bumper to bracket E32 M6   9 N.m
  E36 M8   22 N.m
  E34 M10   43 N.m
2AZ Bumper and bracket to impact absorber E31 M10 Install bolts with bolt cement. 22 N.m
  E38 / E39 / E46 M10   41 N.m
  E36 M10 Install bolts with bolt cement. 55 N.m
  E32 / E34 / E30 / Mod. 88 M12   48 N.m
3AZ Impact absorber/bracket to body E30 / E24     23 N.m
  E31 / E32 / E34 / E36 / E38 / E39 M6   9 N.m
  E32 / E34 M10   48 N.m
  E46 M8   20 N.m
4AZ Carrier to body E46 / E65 / E66 / E67 M8   18 N.m
  E87 / E90 / E91 M8   20 N.m
  E60 / E61 / E63 / E64 M8   21.4 N.m
5AZ Carrier to deformation element E85 M10   38 N.m
  E83 M8   28 N.m
6AZ Deformation element to body E85 M8   19 N.m
  E83 M8   21.4 N.m
7AZ License plate to bumper E60 / E63 / E64     1 N.m
8AZ License plate to bumper (thread repair) E60 / E63 / E64 M5   4.5 N.m