LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 77 (Engine Electrical System - Tightening Torques) >> Connectors, Plus, Loom >> 12 52 Plug Connectors, Terminals

12 52 Plug Connectors, Terminals

WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.
PLUG CONNECTORS, TERMINALS SPECIFICATION

  Type Thread Tightening Specification Measure
1AZ Holder for modules E36 M6   9 N.m
2AZ Ground connections Flange nut E36     16 N.m
3AZ Cover on heating splash wall E36     1.1 N.m
4AZ Battery positive cap to cylinder head cover M67 M5   6 N.m
5AZ Wiring harness (term.50) to starter motor M57TU / M67 M6   8 N.m
6AZ Wiring harness (term.30H) to starter motor M57TU / M67 M5   5 N.m
7AZ Battery positive lead (term.30) to alternator (B+) M57TU / M67 M8   15 N.m
8AZ Cable duct to cylinder head. M57TU M6x12   4 N.m