11 12 Cylinder Head with Cover S54
WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.
CYLINDER HEAD WITH COVER S54 SPECIFICATIONS
| Height of cylinder head (cylinder head must not be machined) | mm | 146.0 +/-0.05 |
| Valve guides are not available as replacement parts. | ||
| Inside diameter of installed valve guide | ||
| Standard | mm | 6.0 H7 |
| Max. tilt clearance (wear between valve and valve guide) |
mm | 0.5 |
| Bearing of camshaft | ||
| Pilot bearing (1) width | mm | 20.4 -0.05 |
| Axial play | mm | 0.1 ...0.183 |