General points:
WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.
The rear spoiler is glued to the rear window. In order to obtain a perfect bond, you must follow the installation procedure described below.
After installation, the rear spoiler must be secured with yellow plastic adhesive tape (sourcing reference: BMW Parts Service); the paint must therefore be completely hardened after painting work.
- In winter, the vehicles must be kept in a room with a minimum temperature of 15°C.
When working with adhesive products (glue, cleaning agent, glass primer etc.):
- Wear protective goggles, protective gloves and, if necessary, aprons.
- Ensure rooms are well ventilated.
- Change work clothing which has been contaminated with adhesive immediately.
- Change work clothing which has been contaminated with solvents and swelling agents immediately (always keep a spare change of work clothing)
- Take skin protection precautions, provide washing facilities with hot water and use skin creams that do not contain silicone
- Keep eye baths on hand, change water regularly (once a month)
- Observe all relevant safety regulations
- Do not eat, drink or smoke in areas where PUR is being processed