LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 66 (Body Equipment - Repair Instructions) >> Front And Rear Window >> 51 31... Instructions on gluing windscreen >> Treatment of glass ceramic surface (inside of window):

Treatment of glass ceramic surface (inside of window):

WARNING: This page is about a different car, the 2002 BMW M Roadster, 2002 BMW M Coupe, 2001 BMW M Roadster, and 2001 BMW M Coupe. However, it is still accessible from the selected car via links, so may be relevant.
TREATMENT OF GLASS CERAMIC SURFACE

Adhesive (with part numbers) Treatment
Hot cementing:
  • BMW 83 19 0 147 370, MINI 83 19 0 147 372

Cold cementing:
  • BMW 83 19 0 147 369, MINI 83 19 0 147 371

Adhesive cartridge:
  • BMW 83 19 0 152 031, MINI 83 19 0 152 032
  1. Clean with spirit (available in pharmacies).
  2. Observe an air drying time of at least 1 minute
  3. Apply a thin coating of "Glass Activator 1"
  4. Observe an air drying time of at least 10 minutes

Version with inspection window for vehicle identification number in windscreen only (all except US/GB):

scientia non olet · About LEMON Manuals