LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Air Bag Restraint Systems) >> Removal & Installation >> Steering Wheel >> Installation

Steering Wheel: Installation

WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2005 BMW M3, 2005 BMW 330xi, 2005 BMW 330i, 2005 BMW 330Ci, and 2005 BMW 325xi. However, it is still accessible from the selected car via links, so may be relevant.
  1. Adjust contact ring before completing steering wheel installation. See CONTACT RING  under ADJUSTMENTS.
  2. Position steering wheel onto shaft splines using reference mark for realignment positioning. At same time, accurately align column locking pins into opening in contact ring on bottom of steering wheel.
  3. Install and tighten steering wheel nut or bolt to specification. See TORQUE SPECIFICATIONS . Connect horn wiring. Install air bag module. Activate air bag system. See ACTIVATING SYSTEM  under DISABLING & ACTIVATING AIR BAG SYSTEM.
scientia non olet · About LEMON Manuals