Air Bag Safety Precautions
WARNING: This page does not describe the selected car, but rather 14 other vehicles, including the 2005 BMW M3, 2005 BMW 330xi, 2005 BMW 330i, 2005 BMW 330Ci, and 2005 BMW 325xi. However, it is still accessible from the selected car via links, so may be relevant.
Observe these precautions when servicing the air bag system:
- Disable air bag system when working on air bag system or compoents. See DISABLING & ACTIVATING AIR BAG SYSTEM .
- Ensure radio is off before disconnecting battery. This will prevent damage to radio microprocessor.
- Disable air bag system before straightening damaged metal or arc-welding. See DISABLING & ACTIVATING AIR BAG SYSTEM .
- Wear safety glasses, gloves and long-sleeve shirt when handling deployed air bag modules. Air bag module may contain sodium hydroxide deposits, which could irritate skin.
- Handle sensors carefully. Never strike or jar sensors. All sensors and mounting bracket screws must be tightened to specification to ensure proper sensor operation.
- DO NOT use any air bag system component that has been dropped from 2 feet (0.6 m) or higher.
- DO NOT use self-powered electrical test equipment, such as battery- powered or AC-powered voltmeter, ohmmeter, test light, etc.
- Handle air bag module with trim cover facing away from your body. Always place air bag module on work bench with trim cover facing up.
- DO NOT expose air bag system components to temperatures greater than 167°F (75°C ).
- DO NOT expose any air bag system components to cleaning agents such as solvents, gasoline, lye etc.