Torque Specifications
WARNING: This page does not describe the selected car, but rather 20 other vehicles, including the 2007 BMW Z4, 2006 BMW Z4, 2006 BMW 330Ci, 2006 BMW 325Ci, and 2005 BMW Z4. However, it is still accessible from the selected car via links, so may be relevant.
TORQUE SPECIFICATIONS
| Application | Ft. Lbs. (N.m) | ||
|---|---|---|---|
| Center Mount-To-Body | 15 (21) | ||
| Clutch Slave Cylinder-To-Clutch Housing/Transmission Case | 16 (22) | ||
| Flexible Disk-To-Propeller Shaft & Transmission Output Flange | |||
| M10 (8.8 Thread) | 35 (48) | ||
| M10 (10.9 Thread) | 47 (64) | ||
| M14 | 103 (140) | ||
| M12 | 74 (100) | ||
| Screw With Rolled-On Shim Only | |||
| Stage 1 | 37 (50) | ||
| Stage 2 | Additional 90° | ||
| Front End Reinforcement On Front Axle Carrier/Engine Carrier | |||
| Stage 1 | 44 (59) | ||
| Stage 2 | Additional 90° | ||
| Stage 3 | Additional 30° | ||
| Reinforcement Plate-To-Front Axle Support/Engine Carrier | |||
| Stage 1 | 44 (59) | ||
| Stage 2 | Additional 90° | ||
| Transmission Cross Member-To-Body | 31 (42) | ||
| Transmission Mounts (Rubber)-To-Body | 31 (42) | ||
| Transmission-To-Engine | |||
| Hex Screws | |||
| M8 | 18 (25) | ||
| M10 | 36 (49) | ||
| M12 | 55 (74) | ||
| Screw With Torx Head | |||
| M8 | 16 (22) | ||
| M10 | 32 (43) | ||
| M12 | 53 (72) | ||
| H-Transmission/G-Transmission | 54 (73) | ||