Vehicles With Abs/ASC+T: Notes
WARNING: This page does not describe the selected car, but rather 43 other vehicles, including the 2006 BMW M3, 2006 BMW 330Ci, 2006 BMW 325Ci, 2005 BMW M3, and 2005 BMW 330xi. However, it is still accessible from the selected car via links, so may be relevant.
Perform the following filling and bleeding procedure when exchanging or repairing tandem-brake master cylinder, hydraulic unit ABS/ASC+T and components, or connecting lines installed between these units. If work is performed on components involving entire system see FLUSH ENTIRE BRAKING SYSTEM .
If work is performed on components involving only the rear system see BLEED REAR-AXLE BRAKE CIRCUIT .
If work is performed on components involving only the front system see BLEED FRONT-AXLE BRAKE CIRCUIT .
When carrying out any other work on the brake system (e.g. replacing brake calipers), see BASIC BLEEDING PROCEDURES .