LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Differentials & Axle Shafts) >> Removal & Installation >> Rear Hub & Carrier Assembly >> Installation

Rear Hub & Carrier Assembly: Installation

WARNING: This page does not describe the selected car, but rather 29 other vehicles, including the 2000 BMW Z8, 2000 BMW Z3, 2000 BMW X5, 2000 BMW M5, and 2000 BMW M Roadster. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Bleed brakes. See appropriate DISC article in BRAKES.

Fig 1: Removing Heat Shield & Bracket
G97J08487Courtesy of BMW OF NORTH AMERICA, INC.
Fig 2: Removing Rear Axle Carrier Bolts
G97B08488Courtesy of BMW OF NORTH AMERICA, INC.


To install, reverse removal procedure. Bleed brakes. See appropriate DISC article in BRAKES.

Fig 1: Removing Trim Panel
G97D08489Courtesy of BMW OF NORTH AMERICA, INC.