Drive Shaft: Installation

WARNING: This page does not describe the selected car, but rather 29 other vehicles, including the 2000 BMW Z8, 2000 BMW Z3, 2000 BMW X5, 2000 BMW M5, and 2000 BMW M Roadster. However, it is still accessible from the selected car via links, so may be relevant.

To install, reverse removal procedure. Check splined sections for damage. Replace as necessary. Ensure drive shaft mating marks are aligned.

To install, reverse removal procedure. Add grease to CV joint as necessary. Check splined sections for damage. Replace as necessary.

Fig 1: Removing Joint Disc (Drive Shaft With Rear CV Joint)

Courtesy of BMW OF NORTH AMERICA, INC.