LEMON Manuals: Even more car manuals for everyone
Home >> BMW >> 2025 >> 230i >> Repair and Diagnosis >> External Pages >> Different car >> Section 3 (Differentials & Axle Shafts) >> Removal & Installation >> Axle Shafts >> Removal (5-Series)

Removal (5-Series)

WARNING: This page does not describe the selected car, but rather 29 other vehicles, including the 2000 BMW Z8, 2000 BMW Z3, 2000 BMW X5, 2000 BMW M5, and 2000 BMW M Roadster. However, it is still accessible from the selected car via links, so may be relevant.
    CAUTION: Wheel bearing is destroyed when drive flange is removed.
  1. Raise and support vehicle. Remove wheel. Remove wheel nut. Remove brake caliper. Remove brake disc rotor. Remove swing arm cover. Install Puller (33 2 116, 33 4 201, 202, 203) to drive flange. Press out drive flange.
  2. Remove inner bearing race from groove in bearing race. Remove wheel bearing bolts. Remove wheel bearing.
scientia non olet · About LEMON Manuals