Shifting vehicle into design position
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
- Lay weights in the area of the spring strut until the vehicle ride height is within the tolerance!
Tolerance for ride height at design level Tolerance for set point value max. 2 mm Difference between left and right max. 2 mm - Measuring vehicle ride height (A): (1) Attach the tape measure to the bottom rim flange (2) and measure the distance to the lower wheel arch edge.