Removing the trim from the left and right water channels
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Removing the trim of the water channel
- Release the clip (1).
- Guide out the trim (2) in the area of the edge protection (3).
- Swivel the lower section of the trim (1) toward the center of the vehicle and guide it out with the guides (2) and (3).
- Release the detent (4) and remove the trim (1) toward the center of the vehicle.