Removing the seat cover with the cushion for the front seat

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Release screws (1) and remove holders (2).

Courtesy of BMW OF NORTH AMERICA, INC.

Releasing the ground cable of the seat occupancy mat (CIS)

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Loosen screw (1).
Loosen the cable clip (2).
Remove the ground cable (3) for the seat occupancy mat from the seat mechanism (4).

Courtesy of BMW OF NORTH AMERICA, INC.

Detach seat cover (1) in the areas (2).
Thread out seat cover (1) with the cushion and remove.
If necessary, unlock and disconnect the existing plug connections and unclip the cable brackets.

Courtesy of BMW OF NORTH AMERICA, INC.