Installing left and right brake ventilation duct

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Description is for left component only. Procedure on the right side is identical.

Install the brake ventilation duct

Insert and position the brake ventilation duct (2).
Fasten expanding rivet (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Secure expanding rivet (1).

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: To provide a better overview: Schematic diagram without front wheel.
Tighten down screws (1).

Courtesy of BMW OF NORTH AMERICA, INC.
Position the vertical connection (2) and clip it into the detents (3).
Tighten down screws (1).

TIGHTENING TORQUES SPECIFICATION

Vertical connection to deformation element
Flat-head screw M6x20	Tightening torque	11.8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.