If installed: Removing the lane change warning sensor

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Schematic diagram is for example purposes. Some parts may differ in certain details.

Unlock and remove the absorber (1) at the snap-in lugs (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Unlock plug connection (2) and disconnect.
Unclip clip (1).
Place wiring harness to one side.

Courtesy of BMW OF NORTH AMERICA, INC.
Release the detents and remove the lane change warning sensor (1) in the arrow direction.

Courtesy of BMW OF NORTH AMERICA, INC.