Fill and vent the coolant circuit
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Fill and bleed the high-temperature coolant circuit
NOTE:
RISK OF DAMAGE
Inadmissible activation of the high-voltage system with drained coolant.
Damage to components (in high-voltage systems).
Inadmissible activation of the high-voltage system with drained coolant.
Damage to components (in high-voltage systems).
- Mandatory fill the coolant circuit before activation of the high-voltage system.
NOTE:
TECHNICAL INFORMATION
It is mandatory to fill the cooling system before bleeding.
Fill both the circuits for high and low-temperature coolant circuits.
It is mandatory to fill the cooling system before bleeding.
Fill both the circuits for high and low-temperature coolant circuits.
- See further information. Refer to VENTING THE HIGH-TEMPERATURE COOLANT SYSTEM .