Attach the control unit holder

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.

Make sure that the control unit bracket (1) is inserted below correctly into the mount (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Correctly position the control unit bracket together with the control units (2).

Tighten down screws (1).

TIGHTENING TORQUES SPECIFICATION

Control unit bracket at the shock tower
Hexagon screw	tightening torque	8 Nm

Courtesy of BMW OF NORTH AMERICA, INC.

Feed in and install the cover (1) in the guides.

Courtesy of BMW OF NORTH AMERICA, INC.