If installed: Installing the silencer of the parked-car heating
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M240i xDrive, 2023 BMW M240i, 2023 BMW 230i xDrive, 2023 BMW 230i, and 2022 BMW M240i xDrive. However, it is still accessible from the selected car via links, so may be relevant.
Installing the silencer
- Feed in and install the silencer (3).
- Slide silencer (3) up onto the auxiliary heater.
- Tighten nut (2).TIGHTENING TORQUES SPECIFICATION
Silencer on stationary heater Nut tightening torque 6 Nm - Tighten down screws (1).TIGHTENING TORQUES SPECIFICATION
Silencer on holder/holder on body Screw tightening torque 8 Nm Nut tightening torque 8 Nm
Installing the silencer
- Feed in and install the silencer (3).
- Slide silencer (3) up onto the auxiliary heater.
- Tighten nut (2).TIGHTENING TORQUES SPECIFICATION
Silencer on stationary heater Nut tightening torque 6 Nm - Tighten down screws (1).TIGHTENING TORQUES SPECIFICATION
Silencer on holder/holder on body Screw tightening torque 8 Nm Nut tightening torque 8 Nm