17 00 Cooling, Test Technical Data (All M4 Models, 2021-2023)
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
17 00 TECHNICAL DATA OVERVIEW
| Coolant level | ||
| Overfill quantity of coolant (above the maximum mark) in the high-temperature expansion tank | + 200 ml | |
| Overfill quantity of coolant (above the maximum mark) in the low-temperature expansion tank (if installed) | + 100 ml | |
| Cooling system test pressure | ||
| Test pressure for cooling system (gauge pressure) | 2.0 bar | |
| Filling capacity of high-temperature coolant circuit G82 | ||
| S58B30T0/S58B30O0 | 11 l | |
| Filling capacity of low-temperature coolant circuit G82 | ||
| S58B30T0/S58B30O0 | 6.6 l | |
| Opening pressure of coolant seal cover | ||
| Pressure relief valve opens when the pressure exceeds the ambient pressure. | min. 1.4 bar | |
| Electric changeover valve must open at latest when the pressure is lower than the ambient pressure | max. 0.1 bar | |
| Opening pressure of sealing cap of low-temperature coolant circuit | ||
| Pressure relief valve opens when the pressure exceeds the ambient pressure. | min. 1.4 bar | |
| Electric changeover valve must open at latest when the pressure is lower than the ambient pressure | max. 0.1 bar | |
| Test pressure for cooling system (gauge pressure) | 1.5 bar | |
| Test conditions for coolant level | ||
| Coolant must be cooled down | ||