Prepare New Part
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Perform the separating cuts on the new part according to the separating cuts on the vehicle.NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Welding in reinforcement plates (sheet steel) - At the separating cuts, prepare reinforcement plates (1).
- Adjust the new part and reinforcement plates (1) and, in areas (2) and (3), prepare for joining by welding.NOTE: TECHNICAL INFORMATION
For additional information see: 41 00... Spot-weld bonding steel components - In area (3), follow the procedure for replacing spot-welded adhesive joints for standard production.