Hot-Film Air Mass Sensor
WARNING: This page does not describe the selected car, but rather 37 other vehicles, including the 2005 BMW 760i, 2004 BMW 760Li, 2003 BMW Z8, 2003 BMW Z4, and 2003 BMW X5. However, it is still accessible from the selected car via links, so may be relevant.
Hot-film air mass sensor is non-adjustable. A faulty hot-film air mass sensor can make engine difficult to restart when engine is hot, engine starts then stalls, malfunction indicator light illuminated, or engine starts and runs only with accelerator pedal depressed. Hot-film air mass sensor can be tested with DISplus/GT1, DISplus/GT1 status page, and the DISplus/GT1 oscilloscope which requires taking the measurement with the ECM and the universal adapter connected to the circuit (engine running).
Visually inspect the sensor for damaged, missing or blocked screens. The screens affect air flow calibration. Also inspect sealing rings where sensor inserts in air filter housing and intake boot. Ensure pin connections are tight.