Installing the low beam sensor
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Feed the low beam sensor (1) in the bracket (2) in the arrow direction.
- Press in the low beam sensor (2) at the retaining spring (3) in the center.
- Successively press down the retaining springs (4) on each side to lock it.
- Connect connector (1).
- Check if air pockets are visible.
Visible shades (1) and (2) are not air pockets but rather the optical element of the sensor. The shades do not represent any functional limitation.
Follow-up work
- Refer to INSTALLING INTERIOR REARVIEW MIRROR .
- Refer to INSTALLING THE COVERS FOR THE INTERIOR MIRRORS .