Program Start
WARNING: This page does not describe the selected car, but rather 18 other vehicles, including the 2002 BMW Z8, 2002 BMW Z3, 2002 BMW X5, 2002 BMW M5, and 2002 BMW M3. However, it is still accessible from the selected car via links, so may be relevant.
Program start using DISplus or GT-1 with diagnostic head connected to vehicle. Select CODING/PROGRAMMING from start mask. When program is started for the first time after a CD installation, there is a longer wait time (about 90 seconds). Start CIP by selecting "8 CIP", then press the forward arrow. See Fig 1. The initial CIP screen is then displayed. After startup, CIP determines the Vehicle Order (VO), previously known as the Central Coding Key (ZCS) and records which control modules are installed in the vehicle. The vehicle order is not displayed on the screen.