Partially releasing the engine oil cooler

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

WARNING: Hot surfaces.
Risk of burning!

Perform all work only on components that have cooled down.

NOTE: TECHNICAL INFORMATION
The work must be performed with vehicle care to prevent component damage.

Drill out the rivet (1) .
Remove the damper (2) .

Courtesy of BMW OF NORTH AMERICA, INC.
Loosen screws (1) .

Courtesy of BMW OF NORTH AMERICA, INC.
Feed out the engine oil cooler (1) in the arrow direction, remove it and set aside.

Courtesy of BMW OF NORTH AMERICA, INC.