Installing the seat cover with cushion for the driver's seat

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

Insert seat cover (1) with the cushion and position.
Attach seat cover (1) In the areas (2) .
If necessary, connect existing plug connections and clip In cable clips.

Courtesy of BMW OF NORTH AMERICA, INC.

Position holder (2) and tighten the screws (1) .

TIGHTENING TORQUE SPECIFICATIONS

Seat trim to seat frame
Sheet metal screw	tightening torque	2.5 Nm

Courtesy of BMW OF NORTH AMERICA, INC.