Installing the backrest covering with the cushion
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Position the backrest covering with cushion (1) on the backrest frame (2) as shown.
- Connect and lock the plug connections, if any.
- Installing the side airbag
- Position the cushion (3) correctly.
- Carefully feed the side airbag (2)
into the pocket in the cover (4)
.
Ensure that the stud bolt of the side airbag (2) does not damage the pocket in the cover (4) .
- Correctly position the side airbag (2) in the cushion (3) .
- Connect and lock the plug connection (1)
(observe additional information).
- Replace nuts (1)
.
Parts: Nuts
- Tighten nuts (1)
.TIGHTENING TORQUE SPECIFICATIONS
Airbag on the backrest frame Nut
Replace nut.tightening torque 6.5 Nm - Position the seat cover (2) correctly and hook at all attachment points.
- Clip in the edge stripping (1)
in the marked area.