Installing bottom front cover from the side

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

Precondition

The front underbody protection has been removed.

Install the cover (1) .

Tighten screws (arrows).

TIGHTENING TORQUE SPECIFICATIONS

Lower side cover at front
Hexagon screw for thermoplastic	Tightening torque	2.6 Nm

Courtesy of BMW OF NORTH AMERICA, INC.