Install the seat cover with cushion (M CFRP bucket seat)

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: RISK OF DAMAGE
Careless handling of tools and sharp-edged components.
Scratches, surface damage.

Protect working area.
Handle tools and components carefully.

Position the seat cover (1) with cushion as shown.

Courtesy of BMW OF NORTH AMERICA, INC.
Feed in the cable (4) for seat heating.
Clip the clip (1) from the seat cover (2) into the seat mechanism (3)

Courtesy of BMW OF NORTH AMERICA, INC.
Connect and lock the associated connector of the cable (3) for the seat heating.
Clip In the cable clip (2).
Clip In the seat cover (1) In the marked area.

Courtesy of BMW OF NORTH AMERICA, INC.

NOTE: The operations shown only for one side must be carried out on both sides.
Clip In the seat cover (1) In the marked area.
Feed In the seat cover (1) In the retaining tabs (2).

Courtesy of BMW OF NORTH AMERICA, INC.
Clip In the seat cover (2) In the marked area.
Clip In clips (1).

Courtesy of BMW OF NORTH AMERICA, INC.