Install both antenna amplifiers

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Description is for left component only. Procedure on the right side is identical.

Installing the antenna amplifier

NOTE: TECHNICAL INFORMATION
The number of connectors on the described component may vary depending on the equipment version.
If necessary unlock and disconnect, or connect and lock, all other connectors.

Correctly position the antenna amplifier (3).

Tighten down screw (2).

TIGHTENING TORQUE SPECIFICATIONS

Antenna amplifier to body
Screw	tightening torque	3 Nm

Connect connectors (1) and lock.

Courtesy of BMW OF NORTH AMERICA, INC.