Check the setting of the glass slide/tilt sunroof panel
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Check whether the distance of the glass slide/tilt roof panel to the front roof and at the rear is the same and correct if necessary.
- Slide the special tool 0 493 687 (00 9 340)
between the gasket (1) and the glass slide/tilt sunroof panel (2).
The resistance when shifting the special tool must be the same at the front and rear.
- Make sure that the glass slide/tilt roof panel at the front lies flush with the roof outer skin and is lower by a maximum of the dimension (a).TECHNICAL DATA SPECIFICATION
Gap dimension roof outer skin to glass slide/tilt sunroof panel 1 roof outer skin; 2 glass slide/tilt sunroof panel a
0.7+0.75-0.75 mm - Make sure that the glass slide/tilt roof panel at the rear lies flush with the roof outer skin and higher by a maximum of the dimension (a).TECHNICAL DATA SPECIFICATION
Gap dimension glass slide/tilt sunroof panel to roof outer skin 1 glass slide/tilt sunroof panel; 2 roof outer skin a
0.7+0.75-0.75 mm - Measure the position of the glass slide/tilt roof panel (1) to roof (2) with special tool 0495 259 (51 0 010)
.