Shifting vehicle into design position
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Lay weights in the area of the spring strut until the vehicle ride height is within the tolerance!TECHNICAL DATA SPECIFICATION
Tolerance for ride height at design level Tolerance for setpoint value max. 2 mm Difference between left and right max. 2 mm - Measuring vehicle ride height (A) : (1) Attach the tape measure to the bottom rim flange (2) and measure the distance to the lower wheel arch edge.