Securing the tie rod on the left and right of the swivel bearing
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
Securing the tie rod on the swivel bearing
- Position the track rod (2) on the swivel bearing (3) .
- Replace nut (1)
.
Parts: Nut
- Tighten nut (1) . If necessary, counter support at the Torx socket.
TIGHTENING TORQUE SPECIFICATIONS
| Tie rod end to swivel bearing | ||
| M14 Replace nut. |
Tightening torque | 165 Nm |