Installing the rear brake guard plate
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Position the brake guard plate (2).
- Replace screws (1).
Parts:
Screws
- Tighten the screws (1).
 Courtesy of BMW OF NORTH AMERICA, INC.
|
TIGHTENING TORQUE SPECIFICATIONS
| Brake protection plate on the rear wheel carrier |
M6x12
Replace screw. |
tightening torque |
8 Nm |