Install the anti-roll bar on the front subframe
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Position anti-roll bar (2)
on front axle support.
- Replace screws (1)
.
Parts:
Screws
- Tighten the screws (1)
.
 Courtesy of BMW OF NORTH AMERICA, INC.
|
TIGHTENING TORQUE SPECIFICATIONS
| Retaining bracket, anti-roll bar, to front axle support |
M8
Replace screw. |
Tightening torque |
28 Nm |