Fastening the right and left output shafts on the rear axle differential

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Perform the steps on the right and left side.

Secure the output shaft on the rear axle differential

Position the special tool 0 495 857 (33 5 125) on the circumferential slot (1) of the output shaft.
Knock the output shaft into the rear axle differential with a rubber mallet.

Courtesy of BMW OF NORTH AMERICA, INC.