Fastening the left and right wheel speed sensor to the wheel carrier
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Perform the steps on the left and right side.
Mounting the wheel speed sensor to the wheel carrier
- Clean and grease the bore for wheel speed sensor (2)
.CONSUMABLE SPECIFICATION
Lubricating grease Staburags NBU 12K 100 g, Tube 83 23 9 407 810 - Position the wheel speed sensor (2) .
- Replace the screw (1)
.
Parts: Screw
- Tighten down screw (1) .