Fastening the clutch slave cylinder
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Release the special tool 2 413 317
between the clutch slave cylinder (1)
and underbody (2)
.
- Feed in and position the clutch slave cylinder (2) with the holder (3) .
- Tighten the screws (1) .
TIGHTENING TORQUE SPECIFICATIONS
| Clutch slave cylinder to clutch housing/transmission housing | ||
| M8 x 25 Replace screws. |
Tightening torque | 19 Nm |