Detaching the wiring harness of the EPS from the front subframe
WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.
- Variant with rear wheel drive:
Unlock and disconnect the plug connections (1) and (2) .
Release clamps (3) .
Remove the cable (4) and put to one side.
- Variant with all-wheel drive:
- Unlock and disconnect the plug connections (1) and (2) .
- Release clamps (3) .
- Remove the cable (4)
and put to one side.
- Release the clamps (1)
.
- Loosen clamp (1) .
- Guide out cable (2) and set it aside.