Checking the tire settings in the CID (only in versions with a Tire Pressure Monitor SA2VB)

WARNING: This page is about a different car, the 2025 BMW M4, 2024 BMW M4, 2023 BMW M4, 2022 BMW M4, and 2021 BMW M4. However, it is still accessible from the selected car via links, so may be relevant.

Check

Check for correct tire setting in the central information display (CID).

Desired state

The mounted tires match the tire setting in the central information display (CID).

Result

» Incorrect tire setting in the central information display (CID).

Measure

Adjust the tire setting in the central information display (CID).
Open the menu:
- Select My vehicle in the menu.
- Select Vehicle status in the menu.
- Select Tire pressure monitor (RDC) from the menu.
Enter the settings:
- Select Tire settings from the menu.
- Select tires: Summer tires/winter tires.
- Select the tire type that is mounted at the rear axle.
- Select the load status of the vehicle.
- Confirm the settings.
Starting measurement of the current tire pressure. The progress of the measurement is displayed.