54 13 SOFTTOP OPERATION, FULLY AUTOMATIC TECHNICAL DATA (M5 2018-2022, M5 Competition 2019-2022)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
54 13 TECHNICAL DATA OVERVIEW
| Adhesive bead of the side window | ||
| Width a | 8 +3-1 mm | |
| Height b | 12 +1-2 mm | |
| Processing time | max. 7 min | |
| C-nozzle | ||
| For windshields, rear windows, and body-specific side window glass | Diameter A | 7.5 +1-1 min |
| Height B | 13 +1-1 mm | |
| HS-AM multi-base filler VOC | ||
| Layer thickness | 30 μm... 40 μm | |
| Hardening time with infrared | 10 min | |
| Hardening time without infrared 60°C | 30 min | |
| Hardening time without infrared 20°C | 1 Tag | |
| Residual height of the adhesive bead | ||
| Residual height of the adhesive bead | max. 1 mm | |
| Sika primer 206 | ||
| Protrusion of the glass activator track opposite the crimped adhesive bead | 1 mm... 2 mm | |
| Air drying time at over 15°C | 10 min | |
| Air drying time at under 15°C | 30 min | |