11 25 Piston With Rings And Bolts Technical Data (All M5 Models, 2018-2022)
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
11 25 TECHNICAL DATA OVERVIEW
| Permissible total wear tolerance between piston and cylinder (engine operated) | ||
| Piston installation clearance (piston worn) | 0.25 mm | |
| Piston diameter | ||
| Measure the piston diameter at distance (A) from the lower end of the piston skirt. | Distance (A) to the lower end of the piston skirt | 27 mm |
| Nominal dimension of piston diameter | 88.987 +0.02-0.02 mm | |
| Piston installation clearance (piston new) | ||
| Piston installation clearance (piston new) | 0.003... 0.023 mm | |
| Piston ring 1st groove A | ||
| Side clearance. | 0.02... 0.07 mm | |
| Piston ring 1st groove H | ||
| Annular groove height. | 1.21... 1.24 mm | |
| Piston ring 2nd groove A | ||
| Side clearance. | 0.015... 0.06 mm | |
| Piston ring 2nd groove H | ||
| Annular groove height. | 1.51... 1.53 mm | |
| Piston ring 3. Groove-A DSF ring | ||
| Side clearance without spiral expander. | 0.02... 0.06 mm | |
| Piston ring 3. Groove-A U-flex ring | ||
| Side clearance without spiral expander. | 0.02... 0.08 mm | |
| Piston ring 3rd groove H | ||
| Annular groove height. | 2.01... 2.03 mm | |