Installing the drive for the seat angle adjustment
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
Precondition
The front seat is adjusted all the way up.
- Position the drive for the seat angle adjustment (4) correctly.
- Tighten the nuts (1) and bolts (2).
TIGHTENING TORQUES SPECIFICATION
| Drive for seat cushion tilt adjustment to seat | ||
|---|---|---|
| Nut M6 | Tightening torque | 14 Nm |
| Stud | Tightening torque | 8 Nm |
- Connect connector (3).
Follow-up work
- Refer to INSTALLING THE FRONT TRIM OF THE FRONT SEAT .
- Refer to INSTALLING OUTER COVER ON FRONT SEAT .
- Refer to INITIALIZING THE ELECTRICAL SEAT ADJUSTMENT DRIVES .