Installing the top view camera
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
- Correctly position the top view camera (3).
- Tighten down screws (2).
TIGHTENING TORQUES SPECIFICATION
| Top view camera to vehicle exterior mirror | ||
|---|---|---|
| screw | Tightening torque | 0.85 Nm |
- Connect connectors (1) and lock.
Follow-up work
- Refer to INSTALLING THE RETAINING RING ON THE OUTSIDE REARVIEW MIRROR .
- Refer to INSTALLING THE PROTECTIVE CAP OF THE EXTERIOR VEHICLE MIRROR .
- Refer to INSTALLING THE MIRROR GLASS .
- Refer to ENCODING/PROGRAMING CONTROL UNIT(S) .