Installing the ultrasonic sensor for the Parking Maneuvering Assistant (PMA) at the front
WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2023 BMW M5, 2022 BMW M5, 2021 BMW M5, 2020 BMW M5, and 2019 BMW M5. However, it is still accessible from the selected car via links, so may be relevant.
NOTE:
Description is for left component only. Procedure on the right side is identical.
NOTE:
To provide a better overview: Schematic diagram with partially hidden components.
- Correctly position the ultrasonic sensor snap in the (3) detent (1).
- Connect connectors (2) and lock.
- Correctly position the wheel arch trim panel (1).
- Tighten all bolts (arrows).
TIGHTENING TORQUES SPECIFICATION
| Wheel arch cover | ||
|---|---|---|
| screw | Tightening Torque | 3 Nm |
| Plastic nut | Tightening Torque | 2.6 Nm |